China Best Supplier of
500 Watt Pure Sine Wave Inverter
500 watt pure sine wave inverter is a high performance DC to AC power inverter with a peak power of 1000W and continous power rating is 500W. On the front of this 500W inverter, equipped with a universal 3-pin AC socket suitable for a variety of plugs (the plug type can be instructed by client). On the back of this converter, you will find a smart LCD display, it will diplay the working information of the machine (LCD is optional).
The 500W inverter is a DC to AC pure sine wave inverter. 500W inverter with continuous power 500 watts and 1000 watts peak power, provides reliable conversion from battery to AC power for 12V vehicles, RVs and small off-grid systems. AC output power can be used to run computers, fans, TVs, stereos, satellite receivers and a wide range of appliances. DC input voltage supports 12V/24V/48V/86V, AC output 110V/120V/230V and 50Hz or 60Hz. XMP series 500W inverter can be used for long term working with full loading and equipped power protection.
Features of 500 Watt Pure Sine Wave Inverter:
1. Small, low-cost, portable, general purpose inverter.
2. Reverse polarity protection by special circuit.
3. The inverter housing is made from high-quality aluminum, quality assurance.
4. Special intelligent LCD display to know the machine status.
5. Integrated cooling fan will work automatically when the temperature of inverter is too high.
6. Protection function: overload, over temperature, high voltage, low voltage, reverse connection and short circuit.
Specification of 500W Pure Sine Wave Inverter
- Model: XP-500W
- Output Waveform: pure sine wave
- Rated Power: 500W
- Peak Power: 1000W
- Output voltage: AC100V/110V/120V/220V/230V/240V
- Input voltage: DC12V/24V/48V/72V/96V/110V
- Frequency: 60HZ
- Size:211*104*70mm
- N. W.: 0.95KGS
Socket types for different Countries

Low Voltage Protection
With low-voltage protection relay, the power inverter will shut down automatically when the voltage is lower than limit value.
Over Voltage Protection
Contrary to low voltage protection, the inverter will automatically shut down when the voltage exceeds the rated voltage
Over Load Protection
When the protector overheats due to overload of the inverter, the machine will stop and then restart automatically.
Over Temperature Protection
Equipped with a temperature sensor, the power inverter will automatically stut down when the temperature is too high restart after it go down.
Input Reverse Polarity Protection
Built-in power reverse polarity protection device, to avoid the problems caused by the reverse of the positive and negative polarity connection.
Short Circuit Protection
When the inverter output is abnormal or a short circuit occurs, it will automatically shut down then restart to recover.
Technical Parameters of 500W Pure Sine Wave Inverter
XP/L(D)-500W Technical Parameters | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Model | XP(D)-500A | XP(D)-500B | XP(D)-500C | XP(D)-500A | XP(D)-500B | XP(D)-500C | |||||
Output | AC voltage | 100/110/120VAC | 220/230/240VAC | ||||||||
Rated power | 500W | ||||||||||
Surge power | 1000W(for few seconds) | ||||||||||
Waveform | Pure Sine Wave(THD<3%) | ||||||||||
Frequency | 50/60Hz±3Hz | ||||||||||
Input | DC voltage | 12V | 24V | 48V | 12V | 24V | 48V | ||||
Voltage range | 10~15VDC | 20~30VDC | 40~60VDC | 10~15VDC | 20~30.0VDC | 40~60VDC | |||||
Efficiency | >87.0% | >90.0% | >90.0% | >87.0% | >90.0% | >90.0% | |||||
Protection | Bat.low voltage alarm | 11±0.5VDC | 22±1VDC | 44±2VDC | 11±0.5VDC | 22±1VDC | 44±2VDC | ||||
Bat.low voltage shut down | 10±0.5VDC | 20±1VDC | 40±2VDC | 10±0.5VDC | 20±1VDC | 40±2VDC | |||||
Overload | Shutdown,then start automatically. | ||||||||||
Over voltage | 15±0.5VDC | 30±1VDC | 60±2VDC | 15±0.5VDC | 30±1VDC | 60±2VDC | |||||
Over temparature | Shut-off output voltage, recover automatically after temperature goes down | ||||||||||
Short circuit | Shut-off output voltage, restart to recover | ||||||||||
Bat.reverse polarity | Reverse protection circuit | ||||||||||
Environment | Reset voltage after LVS | 10.5±0.5VDC | 21±1VDC | 42±2VDC | 10.5±0.5VDC` | 21±1VDC | 42±2VDC | ||||
Working Temp. | 0~40ºC | ||||||||||
Other | Remote control | Switch with 5m wire(optional) | |||||||||
Dimenssion | 211*104*60mm | ||||||||||
Packing | 1.2Kg(28*16*6.5), 12pcs/15.5Kg/Ctn(58*34*22cm) | ||||||||||
Colling fan | Controlled by load and temperature | ||||||||||
Display | Oled Display(optional) | ||||||||||
Warranty | 12 Months | ||||||||||
*60V/72V/96V/110V----These specifications can also be customized. *These data are from our laboratory. |
Application of 500W Pure Sine Wave Power Inverter:
Ideally suitable for Journeys, Camping, Tents, Boat Trip, RVs etc. Working on the way and everywhere where has a battery or solar energy.
Simply connect with 12v/24v Battery as in a Car, Motorcycle, Camper or Boat and use 110v/ 220v electrical appliances.
Notice:
- This product is applicable to high voltage, is a high-risk equipment, please be sure to read the instructions carefully before use, and follow the implementation.
- 500W inverter should be installed in a dry and well-ventilated environment, keep the air inlet above 20CM from the wall.
- When short circuit fault happened, restart the inverter after troubleshooting, otherwise it will damage the inverter.
- Non-professionals please do not open the 500W inverter, because the internal voltage of the inverter is very high. If open the inverter without permission, the warranty will be expired.
Get A Free Quote from Us >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Please don’t hesitate to contact us if you have any questions about our 500 watt pure sine wave inverter.